National Instruments NI CVS-1450 Series Quick Start Manual

Also see for NI Vision CVS-1450 Series: User manual Quick start guide Getting started User manual User manual

National Instruments NI CVS-1450 Series Quick Start Manual Manual pdf 1 page image

Connect the HardwareCaution Before installing NI CVS-1450 Series hardware, refer to the safetyinformation in theNI CVS-1450 Series User Manual.Connect the Camera and Monitor to the NI CVS-1450 DeviceA. Connect the VGA cablefrom the monitor tothe VGA port on theNI CVS-1450 device.B. Plug the IEEE 1394cable into one of theIEEE 1394 ports on theNI CVS-1450 device.Plug the other end ofthe cable into the IEEE1394 port of the camera.C. Plug in and power onthe monitor.Wire Power to the NI CVS-1450 DeviceThis section explains how to connect the power supply (part number 778794-01)to the NI CVS-1450 device. For instructions on how to connect a separate main supply,refer to theNI CVS-1450 Series User Manual.Caution Donot connect the NI CVS-1450 device to a power source other than24 VDC +10%. Refer to theNI CVS-1450 Series User Manual for information aboutpower requirements.D. Plug the 4-position connector from the power supply into the power receptacleon the NI CVS-1450 device.E. Plug the power cord into the power supply.F. Plug the power cord into an outlet.Once connected, the NI CVS-1450 device runs a startup program that acquires images anddisplays them on the monitor. These images verify that the hardware is properly connected.Connect the NI CVS-1450 Device to the Development ComputerVerify that the development computer is connected to the network and powered on.G. Using a standard CAT 5 Ethernet cable (part number 189174), connect from thenetwork port to the Ethernet port on the NI CVS-1450 device.H. Using a standard CAT 5 Ethernet cable, connect from the network port to theEthernet port on the development computer.Note If you are not connecting through a network, use a crossover cable(part number 187375) to connect the NI CVS-1450 device to the developmentcomputer.GHFTo OutletED1QUICK START GUIDENI CVS-1450 Series Compact Vision SystemVision Builder forAutomated InspectionACB