National Instruments NI CVS-1458 Getting Started Manual

National Instruments NI CVS-1458 Getting Started Manual Manual pdf 1 page image

GETTING STARTED GUIDENI CVS-1458Compact Vision System with GigE Vision and Reconfigurable I/OThe NI CVS-1458 is a compact vision system that acquires, processes, an d displays images fromGigE Vision cameras. The NI CVS-1458 ships with preloaded Windows Embedded Standard 764-bit. This document explains how to install and configure the NI CVS-1458.Required ComponentsThe following items are necessary to set up and use the NI CVS-1458: NI CVS-1458 device One or two GigE Vision cameras One CAT 5e or CAT 6 1000Base-T Ethernet cable per GigE Vision camera One CAT 5 10/100Base-TX, CAT 5e, or CAT 6 1000Base-T Ethernet cable to connect thedevice to a network.Note A CAT 5e or CAT 6 1000Base-T Ethernet cable is required to achieve1,000 Mbps (Gigabit) Ethernet performance. CAT 5e and CAT 6 Ethernet cablesadhere to higher electrical standards required for Gigabit Ethernet communication.CAT 5 cables are not guaranteed to meet the necessary requirements. While CAT 5cables may appear to work at 1,000 Mbps, CAT 5 cables are likely to cause bit errorsresulting in degraded network performance. Monitor Keyboard Mouse A compatible power supply, such as the NI PS-15 Power Supply (part number 781093-01) Two ferrites (part number 711849-01)