National Instruments NI PXI-4060 Getting Started Manual

Also see for NI PXI-4070: Manual Getting started guide

National Instruments NI PXI-4060 Getting Started Manual Manual pdf 14 page image

NI Digital Multimeters Getting Started Guide 14 ni.com7. Configuring and Testing in MAXTo configure and test the DMM in MAX, complete the following steps:1. Launch MAX (Start»All Programs»National Instruments»Measurement & Automation).MAX automatically detects the DMM you installed.2. Expand Devices and Interfaces.If you are using a DMM with the LabVIEW Real-Time Module, expand Remote Systems. Findthe target device IP address or name, expand it, and then expand Devices and Interfaces.Note Only NI-DAQmx devices are listed under Remote Systems»Devices and Interfaces.(Windows Vista) Windows Vista does not support Traditional NI-DAQ (Legacy) for DMMs. Referto the Supported Hardware section of the NI-DMM Readme file at Start»All Programs»NationalInstruments»NI-DMM»Documentation to determine which operating system is compatible withyour DMM.3. Verify that the DMM appears under Devices and Interfaces.The DMMs appear in the NI-DAQmx and Traditional NI-DAQ (Legacy) folders in Devices andInterfaces, as follows.Notes If the DMM is not listed, press to refresh. If the DMM is still not listed, repeat the stepsin the 5. Installing the Hardware section. If the DMM still does not appear, visit NI TechnicalSupport at ni.com/support. For more information about using MAX, refer to the available helpfiles within MAX.The NI PXI-4070 is supported by both NI-DAQmx and Traditional NI-DAQ (Legacy). When presentwith both versions of NI-DAQ, the NI PXI-4070 is listed with a different name under the NI-DAQmxand Traditional NI-DAQ (Legacy) folders in Devices and Interfaces.Device Folder Name(s)NI 4065, NI PCI-4070, NI 4071, NI 4072 NI-DAQmxNI PXI-4070 NI-DAQmx and Traditional NI-DAQ (Legacy) *NI 4050, NI 4060 Traditional NI-DAQ (Legacy) ** Windows Vista does not support Traditional NI-DAQ (Legacy) for DMMs.

/ 37

Related manuals for National Instruments NI PXI-4070

National Instruments PCMCIA-4050 Getting Started Manual

National Instruments DAQMeter DAQCard-4050 User Manual

National Instruments 4065 Calibration Procedure

National Instruments FlexDMM PXI-4070 Calibration Procedure

National Instruments FlexDMM PXI-4071 Calibration Procedure

This manual is suitable for:

NI PXI-4070 NI 4065 NI 4070 NI 4071 NI 4072.NI PCI-4060 NI PCI-4065 NI PCI-4070 NI PCIe-4065 NI PCMCIA-4050 NI PXI-4060 NI PXI-4065 NI PXI-4071 NI PXI-4072 NI USB-4065 NI-4050 NI-4060

manualsdatabase

Your AI-powered manual search engine