National Instruments NI SMD-7613 User Manual

Also see for NI SMD-7613: Getting started Getting started

Contents

National Instruments NI SMD-7613 User Manual Manual pdf 12 page image

12 | ni.com | NI SMD-7613/7614/7615/7616 User ManualMotor Wiring RecommendationsThis section explains how to connect motors to the NI SMD-761x. Refer to your motordocumentation for any special considerations that may affect your configuration.Maintain at least 2 in. separation between the power supply cable and input lines or encoderfeedback. All power supply cables should be properly shielded, and the shield grounded at thepower supply. Signal cables should be shielded, and grounded as close as possible to the signalsource.Caution Never connect or disconnect the motor while the system is powered on.Note Ensure any shield or grounding strap on the motor is connected to the chassisground screw located near the motor/power connector.Figure 5. Motor/Power ConnectorFigure 6. Grounding Screw on the Chassis