National Instruments NI TSM-101 series Getting Started
  | |
Contents | 
GETTING STARTEDNI TSM-101x Touch Screen MonitorPackage Contents• NI TSM-101x Touch Screen Monitor• Touch Screen Stylus• USB A-to-A Cable• RS-232 CableNote Refer to the NI TSM-101x Series User Manual at ni.com/manuals forinformation about optional accessories.Getting Started with NI Linux Real-Time1. Connect the desired display interface (VGA, DVI-D, DisplayPort) to the NI LinuxReal-Time controller.2. Connect touch screen modality to the NI Linux Real-Time controller using theUSB A-to-A cable.3. Connect power to the touch screen monitor via the 9 to 36 V terminal block or 9 to 36 Vlocable DC jack using an using an optional power supply accessory.4. To install the necessary drivers, ensure that your NI Linux Real-Time controller has thenormal Recommended Software Set (RSS) installed from MAX. Refer to ni.com/gettingstarted for instructions on installing the RSS.5. In MAX, enable Embedded UI on the NI Linux Real-Time controller and reboot asdescribed in the user manual.6. Calibrate the touch screen if necessary. Go to ni.com/info and enter the Info CodeCalibrateTouchScreenLinuxRT for the proper calibration procedure,considerations and best practices.7. Disconnect power from the touch screen monitor before mounting. Refer to theNI TSM-101x Series User Manual for mounting options and instructions.Getting Started with Windows1. Connect the desired display interface (VGA, DVI-D, Display Port) to the Windows computer.2. Connect touch screen modality to the Windows computer using the USB A-to-A cable orRS-232 cable.3. Connect power to the touch screen monitor via the 9 to 36 V terminal block or 9 to 36 Vlockable DC jack using an optional power supply accessory.4. Download and install the latest PenMount 6000 resistive touch driver for your OS fromhttp://www.salt.com.tw/en/service-support/downloads/software.5. Calibrate the touch screen if necessary. Follow the PenMount driver prompts as describedin the user manual.6. Disconnect power from the touch screen monitor before mounting. Refer to theNI TSM-101x Series User Manual for mounting options and instructions. |
Related manuals for National Instruments NI TSM-101 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine