National Instruments PCIe-1477 Getting Started Manual

Contents

National Instruments PCIe-1477 Getting Started Manual Manual pdf 7 page image

Verifying the InstallationAfter you have installed the device and powered on your computer, Windows will recognizethe device and assign resources to it. You can verify that the system recognizes the NIPCIe-1477 by using Measurement & Automation Explorer (MAX).1. Launch MAX by navigating to Start»All Programs»National Instruments»MAX or byclicking the MAX desktop icon.2. Expand Devices and Interfaces.3. Verify that the NI PCIe-1477 device appears under Devices and Interfaces.If the device does not appear, press to refresh the view in MAX. If the device doesnot appear after refreshing the view, visit ni.com/support for troubleshooting information.Connectors and InterfacesFigure 3. Front Panel Interface32141. Digital I/O Connector2. Base Camera Link SDR Connector3. Medium/Full/Extended Camera Link SDRConnector4. Power over Camera Link LEDsNI PCIe-1477 Getting Started Guide | © National Instruments | 7