National Instruments PXI-1006 User Manual

Also see for NI PXI-1006: User guide Installation guide

Contents

National Instruments PXI-1006 User Manual Manual pdf 21 page image

Chapter 2 PXI-1006 Features© National Instruments Corporation 2-9 PXI-1006 User ManualInstalling Filler PanelsTo optimize module cooling performance, install filler panels into unusedor empty slots. Secure with the captive mounting screws.Using the Chassis Initialization FileTo assist system integrators, the PXI specification requires manufacturersof PXI chassis and system modules to document the capabilities of theirproducts. The minimum documentation requirements are containedin .ini files, which consist of ASCII text. The system integrator canread the .ini file, and configuration utilities and device drivers can alsouse this file. The PXI-1006 chassis initialization file, chassis.ini,is included on the diskette for your PXI-1006.CleaningCleaning procedures consist of exterior and interior cleaning of the chassisand cleaning the fan filters. Refer to your module user documentation forinformation on cleaning the individual CompactPCI or PXI modules.Caution Always power-off the chassis and disconnect the power cord before cleaning orservicing the chassis.Mise en garde Veillez à éteindre le châssis et déconnecter le cordon d’alimentation avantde nettoyer ou d’intervenir sur le châssis.Interior CleaningUse a dry, low-velocity stream of air to clean the interior of the chassis. Usea soft-bristle brush for cleaning around components. If you must use aliquid for minor interior cleaning, use a 75% isopropyl alcohol solution andrinse with deionized water.Exterior CleaningClean the exterior surfaces of the chassis with a dry lint-free cloth or asoft-bristle brush. If any dirt remains, wipe with a cloth moistened in a mildsoap solution. Remove any soap residue by wiping with a cloth moistenedwith clear water. Do not use abrasive compounds on any part of the chassis.