National Instruments SCXI-1370 Installation Manual

Contents

what you need to get started

National Instruments SCXI-1370 Installation Manual Manual pdf 1 page image

NATIONALINSTRUMENTS®The Software is the Instrument ®Installation Guide371193A-01 © Copyright 1995 National Instruments Corporation. All rights reserved. March 1995SCXI-1370 Rack-Mount Kitfor the SCXI-1001 ChassisThis guide describes how to attach the SCXI-1370 rack-mount kit to an SCXI-1001 chassis.IntroductionYou can use the SCXI-1370 rack-mount kit to mount the SCXI-1001 chassis in a standard19 in. rack. With the multiposition rack-mount brackets, you can install the SCXI-1001 in one ofsix different positions to attain the desired front panel depth.What You Need to Get StartedSCXI-1370 rack-mount kitTwo rack-mount bracketsFour 8-32 by 5/16 in. Philips flathead screwsFour 10-32 by 1/2 in. Philips panhead screwsTwo 6-32 by 1/4 in. Philips flathead screwsSCXI-1370 Rack-Mount Kit Installation Guide#2 Philips-head screwdriverSCXI chassisInstallationRefer to Figure 1 as you perform the following installation steps. The rack-mount brackets canbe mounted in one of six positions to attain different depths. For detailed measurements of theSCXI-1001 chassis, refer to Appendix A, Specifications, of the SCXI-1000/1000DC/1001 UserManual. Item numbers refer to the labels in Figure 1.1. Turn the SCXI-1001 chassis power off.2. Use the four 8-32 screws (item 1) to attach the rack-mount brackets (item 2) to your SCXIchassis.3. Use the two 6-32 screws (item 3) to secure the rack-mount brackets to your SCXI chassiswhen the brackets are in positions 1, 2, 3, or 4.4. Use the four 10-32 screws (item 4) to attach the assembly to your rack.

/ 2

Related manuals for National Instruments SCXI-1370