National Instruments UMI-7774 User Manual And Specifications

Also see for UMI-7772: User manual USER GUIDE AND SPECIFICATIONS

National Instruments UMI-7774 User Manual And Specifications Manual pdf 11 page image

NI UMI-7774/72 User Guide and Specifications 10 ni.comNote The external dimensions for the UMI-7772 are the same as the dimensions for the UMI-7774,shown in Figure 4 and Figure 5.Figure 4. UMI-7774, Front View with DimensionsFigure 5. UMI-7774, Side View with DimensionsMounting the UMI-7774/72 on a DIN RailThe UMI-7774/72 has one clip for mounting on a standard 35 mm DIN rail. You can order the DIN railmounting kit (part number 778710-01) from National Instruments. Complete the following stepsto mount the UMI-7774/72 on a DIN rail.Caution To prevent damage to the UMI-7774/72, do not use screws longer than 0.25 in. to fasten theDIN rail clip to the UMI-7774/72.1. Fasten the DIN rail clip to the UMI-7774/72 using a number 2 Phillips screwdriver and the two8-32  0.25 in. countersink screws shipped with the DIN rail clip as shown in Figure 6. Thesescrews have a nylon coating to prevent them from loosening.FAULT FWD HOME REV FAULT FWD HOME REV FAULT FWD HOME REV FAULT FWD HOME REVLIMIT LEDFAULT ENABLE5.000 in.(126.93 mm)10.200 in.(259.08 mm)LIMIT LEDFAULT ENABLE LIMIT LEDFAULT ENABLELIMIT LEDFAULT ENABLE0.867 in.(22.01 mm)10.200 in.(259.08 mm)Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com