National Instruments WSN-3230 User Manual And Specifications

Also see for NI 9795: Getting started guide

Contents

© National Instruments Corporation 11 NI WSN-3230/3231 User Guide and SpecificationsFigure 9. Integrated Panel Mount SlotsCaution Disconnect power before removing the device from the panel.Setting Up the NI WSN-3230/3231 DeviceThe following sections discuss setting up the NI WSN-3230/3231 for use.Installing the SoftwareFor more information about NI-WSN software, go to ni.com/info and enter wsnsoftware.You must be an administrator to install NI software and devices on your computer. Before connectingthe hardware, install the following software in the following order:1. NI LabVIEW 2011 or later2. NI LabVIEW Real-Time Module 2011 or later (required for NI 9795 and NI 9792 support)3. NI-RIO 4.0 or later (required for NI 9795 support)4. NI LabVIEW WSN Module 2011 or later, which installs NI-WSN 1.3 or later (required) andNI MAX (required)5. NI-WSN 1.3 or later (includes NI MAX)Tip NI-WSN 1.3 or later and NI MAX are also included on the software installation disc includedwith your NI WSN gateway and are also available for download at ni.com/support.Note After installation of NI-WSN, the NI Wireless Sensor Network Getting Started Guide isavailable from Start»All Programs»National Instruments»NI-WSN.