National Instruments cRIO-9068 User Manual

Also see for cRIO-9068: Getting started guide

Contents

National Instruments cRIO-9068 User Manual Manual pdf 2 page image

Ambient Temperature......................................................................................................16Mounting the Device Directly on a Flat Surface............................................................ 17Mounting the Device on a Panel..................................................................................... 18Mounting the Device on a DIN Rail............................................................................... 19Mounting the Device on a Rack......................................................................................21Mounting the Device on a Desktop.................................................................................21Worldwide Support and Services............................................................................................ 23Configuring Startup OptionsComplete the following steps to configure the cRIO-9068 startup options in MAX.1. In MAX, expand your system under Remote Systems.2. Select the Startup Settings tab to configure the startup settings.cRIO-9068 Startup OptionsYou can configure the following cRIO-9068 startup options.Table 1. cRIO-9068 Startup OptionsStartup Option DescriptionForce Safe Mode Rebooting the cRIO-9068 with this setting on starts the cRIO-9068without launching LabVIEW Real-Time or any startup applications. Insafe mode, the cRIO-9068 launches only the services necessary forupdating configuration and installing software.Enable ConsoleOutRebooting the cRIO-9068 with this setting on redirects the console outputto the RS-232 serial port. You can use a serial-port terminal program toread the IP address and firmware version of the cRIO-9068. Use a null-modem cable to connect the RS-232 serial port to a computer. Make surethat the serial-port terminal program is configured to the followingsettings:• 115,200 bits per second• Eight data bits• No parity• One stop bit• No flow controlDisable RTStartup AppRebooting the cRIO-9068 with this setting on prevents any LabVIEWstartup applications from running.2 | ni.com | NI cRIO-9068 User Manual