9 Controlling Instrument and Effect ParametersThis section introduces you to controlling Instrument and Effect parameters using the KOM-PLETE KONTROL keyboard and explains how to customize parameter mappings.9.1 About Pre-Mapped Instruments and EffectsAll KOMPLETE and NKS Instruments and Effects are pre-mapped, which means that the key-board’s knobs and Touch Strips are automatically assigned to key parameters as soon as youload an Instrument in KOMPLETE KONTROL. You do not have to manually configure a map-ping or assign knobs via MIDI learn.You can customize the parameter mapping for each Preset file in the Plug-in Panel of the KOM-PLETE KONTROL software. For more information, refer to ↑9.4, Customizing Parameter Mappingsusing the Plug-in Panel.9.2 Adjusting ParametersOnce you have loaded an Instrument, the eight knobs on the keyboard are automatically as-signed to eight Instrument parameters. Whenever you turn a knob on the KOMPLETE KON-TROL keyboard, the mapped parameter visually reflects the movement in the KOM-PLETE KONTROL software.► To adjust an Instrument parameter, turn the corresponding knob on the keyboard. Themapping of each knob is indicated by the displays.Controlling Instrument and Effect ParametersAbout Pre-Mapped Instruments and EffectsKOMPLETE KONTROL A-Series - Manual - 103
