Screen Element DescriptionPadsSensitivity Slider Use the Sensitivity Slider to adjust how sensitive the pads respond to yourtouch. This sets the minimum threshold at which MASCHINE hardwarecontroller will register a “hit.”Velocity Scaling Velocity Scaling determines how your playing is translated into velocity val-ues: starting from Soft 3 (a soft touch is enough to get a big velocity value)through Linear to Hard 3 (you really have to hit the pad hard to get a bigvelocity value).DisplayBrightness The Brightness Slider allows you to adjust the brightness of both Left andright displays of the MASCHINE hardware controller.Contrast Left & Right With these sliders you can adjust the contrast of the Left and right displaysseparately.Adjusting the Settings from the HardwareYou also have access to these settings from the MASCHINE hardware controller. To do this,you first have to enter the MIDI mode by pressing SHIFT + CONTROL. In MIDI mode, pressSHIFT + Button 4 to show the Settings Display mode. In this mode, the left display gives youaccess to all of the settings described above, with the exception of the Velocity Scaling. TheKnobs 1-4 allow you to adjust the Brightness, Pad Sensitivity, Contrast Left and ContrastRight, respectively.When you’re done, press SHIFT + CONTROL again to quit the MIDI mode and get back to Con-trol mode.2.5 Audio and MIDI Settings► To open the Audio and MIDI Settings dialog, select the Audio and MIDI Settings… entryfrom the File menu.Basic ConceptsAudio and MIDI SettingsMASCHINE - Manual - 36
