10.2.2 Using a Performance EffectAfter selecting a Performance FX you can start to interact with it. This is where the fun reallybegins!To adjust a Performance FX:1. Press PLAY to start playback of your Song.2. Press the Group button (A–H) to select the Group where you applied the Performance FX.3. Put your finger on the Smart Strip and slide it upwards to increase the effect, or slide itdownwards to decrease the effect.→ The effect can be heard as you slide your finger up and down the Smart Strip. Take yourfinger off the Smart Strip to release the effect.Adjusting the Performance FX ParametersEach Performance FX has a set of dedicated parameters that can be adjusted using the SmartStrips. These parameters can also be viewed in the Control Area of the MASCHINE software.To adjust the individual parameters of the selected Performance FX:► Press the CONTROL button.→ The Smart Strips can now be used to adjust the parameters of the Performance FX. Usethe Page buttons to switch between parameter pages.For a full description of Performance FX parameters, see the MASCHINE Software Manual,available from the Help menu.10.2.3 Automating a Performance EffectAfter selecting a Performance FX and applying it to a Group, if you find something you likewhile playing with it, you can automate it! Automation will replicate any movement you makewith your finger on the Smart Strip, leaving your hands free to perform other tasks.To automate a Performance FX:1. Press PLAY to start playback of your song.Mixing Your SongUsing Performance EffectsMASCHINE JAM - Manual - 153