▪ Effect on a Group: Press Button 2 (GROUP) to select the Group level, then press the de-sired Group button (A–H) to select the corresponding Group.▪ Effect on a Sound: Press Button 3 (SOUND) to select the Sound level, press the desiredGroup button (A–H), then press the desired pad (or SELECT + the desired pad if the Key-board mode is active) to select the corresponding Sound.1. Press Button 5 or 6 to select the effect you want to bypass.2. Hold SHIFT and press Button 7 above the right display to bypass the selected effect.The effect unit does not affect the sound anymore. For example, here the Saturator is by-passed:3. To reactivate a bypassed effect, press Button 5 or 6 to select the effect.4. Hold SHIFT and press Button 7 to reactive the effect.6.3 Modulating Effect ParametersOne of the really cool features of MASCHINE is the ability to modulate parameters from theControl area in a very easy way — both from the controller and in the software. Modulating aparameter means recording an offset to its value over time in order for these changes to beplayed back again automatically in your song. The modulation data is saved into the currentPattern. As an example, you could use this to create a filter sweep played in loop with yourPattern.Modulation is not limited to effects: In MASCHINE, you can modulate just about anyparameter at the Group or Sound level as soon as it has a continuous range of values —in other terms, almost any parameter controlled by a knob in the Parameter area!Applying EffectsModulating Effect ParametersMASCHINE STUDIO - Getting Started - 97
