2.3.2 Switching Between the Master, Group, and Sound LevelAt any time you can quickly switch the Control area between the parameters of the Master, thefocused Group, and the focused Sound.Click the desired tab to switch the display of the Control area.► Click the MASTER, GROUP or SOUND tab in the top left corner of the Control area todisplay the Plug-in parameters or Channel properties of the Master, the focused Group orthe focused Sound, respectively.→ The selected tab lights up. The name of your Project, the focused Group or the focusedSound appears under the MASTER, GROUP, and SOUND tabs (the Muddy Matt Sound inthe picture above), and the rest of the Control area displays the Plug-in parameters andChannel properties of the Master, the focused Group or the focused Sound, respectively.Switching Between the Master, Group, and Sound Level using the ControllerOn your controller:1. Press the CHANNEL or PLUG-IN button to enter Control mode.2. Press Button 1 (MASTER), Button 2 (GROUP) or Button 3 (SOUND) above the left displayto show the Plug-in parameters and Channel properties of the Master, the focused Groupor the focused Sound, respectively.→ The selected tab lights up. The name of your Project, the focused Group or the focusedSound appears on the left display (under the MASTER, GROUP, and SOUND tabs), andthe displays show the Plug-in parameters and Channel properties of the Master, the fo-cused Group or the focused Sound, respectively.Basic ConceptsCommon OperationsMASCHINE STUDIO - Manual - 43
