Native Instruments Maschine Getting Started Manual

Also see for Maschine: Manual Reference manual Getting started Manual Getting started

Contents

Native Instruments Maschine Getting Started Manual Manual pdf 67 page image

4. Play around with the parameters of the Compressor to get used to it!If you have VST/AU effect plug-ins installed you may also load them from the effects menuby selecting Plug-ins from the list.5.4 Applying Effects to the MasterYou can apply four effects to the Master so that all your Sounds and all your Groups to-gether are being sent into the effect.Hardware1. Press Button 1 to put the focus on the MASTER tab which gets selected on the leftdisplay.2. On the right display, you can now see Modules 1-4. Select Module 1 by pressing But-ton 5.3. To select an effect for Module 1, press SHIFT + BROWSE. The right display now showsthe list of the available effects.4. On the left display, use Knob 1 to set the TYPE to INTERNAL for MASCHINE FX orPLUG-IN for VST/AU plug-ins. The right display now shows the list of the available ef-fects. If you want to load a VST/AU plug-in effect select PLUG-IN.5. You can browse through them by either turning Knob 5, or by using buttons 5 and 6.6. When you’ve found an effect you want to apply, press Button 8 to load it into Module1.7. Switch back to Control mode by pressing the CONTROL mode button.8. Now you can edit the effect parameters using the knobs!SoftwareSelect the MASTER tab and then click the Arrow on the right of the Module to select an ef-fect for the Master.Using Effects & RoutingApplying Effects to the MasterMASCHINE - Getting Started - 67