MASCHINE 1.5 Reference Manual – 197. The Setup Program will lead you through the installation procedure. Follow the onscreeninstructions.8. After the installation has been performed successfully, click FInISh.9. Now to install the MASCHINE Controller hardware driver, you need to connect theMASCHINE Controller to your computer. On Windows® Vista, the driver setup will finishautomatically. On Windows® XP, the following screen should appear:10. Select No, not this time and click nExt.!In case of a warning message concerning the “Windows® Logo test” click C ontInUE toproceed.11. On the following screen select Install software automatically and click nExt.12. Now the MASCHINE Controller hardware driver installation will finish. Subsequently gothrough the same procedure in order to install the MASCHINE Controller USB driver.1.5.3 Installing the MASCHINE Software on Mac OS® X1. Place the installation DVD-ROM in your computer’s DVD-ROM drive. Its icon will appearin the Mac OS® X Finder.2. Connect the MASCHINE Controller using the USB cable.!If you want to connect the MASCHINE Controller to a USB-hub instead, make sure thehub has its own power supply - the MASCHINE Controller will not work on a passive(bus-powered) USB hub.3. Double-click the MASCHINE DVD icon to display the content of the DVD.4. Double-click the installer file named MASCHINE.5. Click C ontInUE to proceed.6. To continue, you need to first accept the license agreement. After you have read the li-cense agreement, press C ontInUE and click aGrEE.
