Native Instruments TRAKTOR AUDIO 2 MK2 User Manual

Contents

Native Instruments TRAKTOR AUDIO 2 MK2 User Manual Manual pdf 50 page image

6.6 Final Steps on Windows1. Open Start > Control Panel > Hardware and Sound > Sound.2. In the Sound Control Panel, select the Playback tab.3. Choose the output channel Traktor Audio2 MK2 Main.4. Click Set Default.5. Click OK to confirm your selection and close the window.→ TRAKTOR AUDIO 2 is now selected as the default audio output device.6.7 Using TRAKTOR AUDIO 2 as Audio Output Device with Your MusicSoftwareBeforeusing the TRAKTOR AUDIO 2 with music production or DJ software, here are a fewnotes to be aware of:▪ When using TRAKTOR with your music software on a Windows system, make sure that youeither have installed the TA2 hardware driver with the latest TRAKTOR software, or youdownload and install the TA2 hardware driver as described in section ↑6.1, Driver Soft-ware Installation on Windows, before you connect the TA2 to your computer.▪ You will need to set it up as your software's output device. Most music production and DJprograms provide direct access to the soundcard properties in the audio and MIDI setupsection of their preferences dialog.▪ It is recommended to use the TA2 Main output in your operating system software sincethe TA2 Headphone output will automatically monitor the Main signal by default.If you intent to set up your music software such that you can send a unique signal to theheadphones, choose the TA2 Headphone output. In order to this you must rotate the CueMix encoder fully towards the rear of the TA2. This will then cause the Headphones outputto monitor the discrete Headphone signal from your music software.Using TRAKTOR AUDIO 2 as Your Computer's Default Audio Output DeviceFinal Steps on WindowsTRAKTOR AUDIO 2 - Manual - 50