Nautilus EVO S9AA Owner's Manual
                  | |
Page 15Belt AdjustmentBelts require tightening when a lack of resistance and uneven feel is noticed at the beginning of anexercise. USE CAUTION AROUND THE WEIGHT STACK WHEN TIGHTENING BELTS.Adjustment procedure:1. Remove the Shielding.2. Remove the Tethered Weight-Pin fromweight stack hole.3. Lift top weight using the appropriatelifting mechanism - in most cases themoving arms for exercising.4. While top weight is suspended, insert ashim between the first and second weight(two quarters will suffice).5. Release top weight so the first stack isresting on the shim.6. Loosen the two bolts at the end of thebelt and pull through excess belting untiltight.7. Tighten belt bolts and lift top weight to remove the shim.8. Lower the mechanism to rest on the weight stack.9. If belt is still loose, repeat this procedure until there is no looseness at the beginning of an exercise.Note: On the ONE units the belt adjustment is inside the engine shrouds. |
Related manuals for Nautilus EVO S9AA
This manual is suitable for:
EVO S9AAEVO S9ABEVO S9BCEVO S9CREVO S9GRVEVO S9IPEVO S9LATPEVO S9LBEVO S9LCEVO S9LCPEVO S9LEEVO S9LPEVO S9LREVO S9LRPHEVO S9MREVO S9OPEVO S9PCEVO S9PFEVO S9POEVO S9RDPFEVO S9RTEVO S9SCEVO S9SDEVO S9TEEVO S9VCEVO S9VTENOVA S8AANOVA S8ABNOVA S8AB-LBNOVA S8BCNOVA S8BC-TENOVA S8CRNOVA S8LATPNOVA S8LBNOVA S8LCNOVA S8LENOVA S8LE-LCNOVA S8LP-CFNOVA S8LRNOVA S8LT-CRNOVA S8MCHNOVA S8OPNOVA S8PFNOVA S8TPONE S6AAONE S6AAMONE S6ABCONE S6ABLONE S6BCONE S6CPONE S6FWNONE S6LATPONE S6LBONE S6LBLONE S6LCONE S6LCLONE S6LEONE S6LELONE S6LPONE S6LPL02ONE S6LRONE S6MRONE S6PFONE S6RTONE S6SPONE S6TE
manualsdatabase
Your AI-powered manual search engine