7171717171Technical support 1-800-864-1270 Fax 1-877-686-6466NE 2000NE 2000NE 2000NE 2000NE 2000MECHANICAL TROUBLESHOOTING1. PROBLEM: Belt slipping, too tight or makes noisea. Check the belt for cracks or wear and Adjust the belttension using the tensioners.If there are cracks in the beltor adjusting the tension does not solve the problem, replacethe belt2. PROBLEM: Workout resistance needs adjustmentSOLUTION: a. Adjust cable. See proceedure below.To adjust the cable, first shift the bike to level 16 thenloosen the locking nut using a 10mm wrench or adjustablewrench, turning it counter clockwise.To tighten the cable, turn the adjustment barrel clockwise.To loosen the cable, turn the adjustment barrel counterclockwise.The brake is adjusted properly if the bottom of the cablestop lies between the two lines to the right of the slot.After the adjustment is made firmly tighten the locking nut(clockwise) while holding the adjusting nut fixed.SOLUTION: