Nautilus T624 Service Manual

Also see for T624: Assembly and owner's manual

Contents

Nautilus T624 Service Manual Manual pdf 7 page image

7Earthing InstructionsThis product must be electrically earthed. If a malfunction occurs, correct earthing decreases the risk of electric shock. Thepower cord is equipped with an equipment-earthing conductor, and must be connected to an outlet that is properly installedand earthed.The electrical wiring must comply with all applicable local and provincial standards and requirements.Incorrect connection of the equipment-earthing conductor can result in a risk of electric shock. Consult alicensed electrician if you are not sure that the machine is correctly earthed. Do not change the plug on themachine – if it does not fit the outlet, have a correct outlet installed by a licensed electrician.If you connect the machine to an outlet with RCBO (Residual-Current circuit Breaker with Overload protection), machineoperation can cause the circuit to trip. A Surge Protector Device is recommended to protect the machine.! If a Surge Protector Device (SPD) is used with this machine, be sure that it matches the power rating of this equipment(220-240V AC). Do not connect other appliances or devices to the surge protector in combination with this machine.Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should beused with this product.Emergency Stop ProcedureThe Treadmill machine is equipped with a Safety Key that can prevent serious injury, as well as prevent children from playingwith and/or being injured on the machine. If the Safety Key is not correctly inserted into the Safety Key Port, the belt will notoperate.! Always attach the Safety Key Clip to your clothing during your workout.When you use the machine, only remove the Safety Key in an emergency. When the key is removed while the machineis in operation, it will stop quickly, which could cause the loss of balance and possible injury.For safe storage of the machine, and to prevent unsupervised operation of the machine, always remove the Safety Keyand disconnect the power cord from the wall outlet and the AC input. Place the power cord in a secure location.The Console will display “ + SAFETY KEY ”, or add Safety Key, for a Safety Key fault. The Treadmill machine will not start aWorkout, or will end and clear an active Workout, when the Safety Key is removed. Inspect the Safety Key and be sure it isconnected to the Console correctly.