Nautilus T626 Assembly Manual

Also see for T626: Service manual Assembly manual / owner's manual

Contents

Nautilus T626 Assembly Manual Manual pdf 27 page image

27Leveling the MachineThe machine needs to be leveled if your workout area is uneven. To adjust:1. Place the machine in your workout area.2. Adjust the levelers until they all contact the floor.Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you ordamage to the machine can occur.3. Adjust until the machine is level.Make sure the machine is level and stable before you exercise.Treadmill BeltYour treadmill comes equipped with a durable, high quality walking belt designed to provide many hours of reliable service.The walking belt on a treadmill that has not been operated for a length of time, either in factory packaging or after assembly,can exhibit a “thumping” noise when started. This is due to the belt taking on the curve of the front and rear rollers. This is acommon occurrence and does not indicate a problem with your machine. After the treadmill has been used for a short periodof time the thumping noise will discontinue. The amount of time will vary depending on the temperature and humidity of theenvironment where the treadmill is placed.