Navico WM-2 Installation Manual
                          | |
Contents
| 
Wiring the WM-2 Weather Module | 13Wiring the WM-2 Weather ModuleWiring guidelinesDon’t do this Do thisDon’t make sharp bends inthe cables.Do make drip and serviceloopsDon’t run cables in a waythat allows water to flowdown into the connectors.Do tie-wrap all cables to keepthem secureDon’t route the data cablesin areas adjacent to radar,transmitter, or large currentcarrying cables.Don’t cut or modify theantenna cableConnectors overviewRed FuseYellowBlack12 or 24 V DC+ _DBA CKey DescriptionA Audio out: line level audio out. Connect to onboardamplifier and speakers using the provided cable.B Network. Connect to the display system’s Ethernetnetwork.C Sirius satellite antenna connector.D Power: Connect to 12 or 24 v DC. The WM-2 is pro-tected by an internal auto resetting fuse. Connect to abreaker or fuse to protect the cable |
Related manuals for Navico WM-2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine