NAVCAM-FHD USER MANUAL3NavCam-FHD Manual Ver 2.2 12/2013PRODUCT FEATURES1 On/Off Button.Hold for 3 seconds to turn ONor OFF 9 Factory reset switch. Insert a small paper clip into this holeto reset settings back to default.2Menu Button. Press to access menu featuresand preferences.Under Video Mode–adjust Resolution, LoopRecording, Motion Detection, Record Audio,Date Stamp and G-sensor.Under Camera Mode – adjust Resolution,Sequence, Quality, Sharpness, White Balance,Colour, ISO, Exposure, Anti-Shake, QuickReview and Date Stamp.10Navigate UP through Menu items or Increases DigitalMagnification.Under Video Mode – Zoom IN before and during recording.Under Camera Mode – Zoom IN before taking a photoUnder Playback Mode – Scroll UP to review saved files.3 Mini USB Interface. Usedfor charging / powerport or PC interface and file transfer 11Navigate DOWN through Menu items or increases DigitalMagnification.Under Video Mode – Zoom OUT before & during recording.Under Camera Mode – Zoom OUT before taking a photoUnder Playback Mode – Scroll DOWN to review files.4 AV-Output. TV connection via Composite3.5mm (cable not included). 12Record. Start or stop recording or enter/confirm selectionsfrom the menu.Under Video Mode – Begin recordingUnder Camera Mode – Take a still pictureUnder Playback Mode – Select file for playback5 Micro SD Card Slot. Cards up to 32GB aresupported. 13Mode. Select between Video/ Camera /Playback modes orpress and hold to mute or un-mute microphone.Note: When the device is muted, the microphone icon will becrossed out with a red line.6HDMI-Output. High definition TV connectionvia HDMI port. Mini HDMI required. (Cable notincluded).14 Mounting point. For use with the Windscreen suction mount(included)7 Microphone. 15Indicator lamp. Blue when Charging; Red when device isturned on. Blue and Red flashing during recordingNote: Please note that charging the battery via computerUSB is not possible.8 Camera Lens. 16 LED Light21381110 1269 71 4 35141516