User's manual BLUE EditionInstallation and quick-start guide - 11 -2.2 Installation of the navigation system2.2.1 Inserting the memory card into the deviceInsert the memorycard into the device…Before using MobileNavigator you must insert the memory cardcontaining the cartographic data into the device.1. Unpack the memory card carefully. Pay attention not to touchcontacts and not to make them dirty.2. Hold the memory card as shown below (label up, cutcorner bottom right). Insert the memory card into therespective slot at the left of the device. It should snap in.Notice: The memory card must stay inserted in the device whileyou are using the navigation system. If you remove the cardwhile using the system, it executes a soft reset and prompts youto insert the memory card.2.2.2 Installing the navigation softwareInstall the navigationsoftware...1. Take the stylus and push the main switch on the pack of thedevice to the ON position.The brand logo is being displayed for a short time. Theinstallation procedure starts automatically. After a fewseconds, the system prompts you to enter the activation
