NAVIGON Lifetime TrafficTMC Settings WindowDecember 2008 NAVIGON 5100 max User’s Guide 115Version 2.1 NAVIGON, INC.TMC Settings WindowIn the TMC S ETTINGS WINDOW, you can set and configure the TMC receiver, these set-tings determine how received traffic messages will affect subsequent routing.On the M AIN WINDOW :1. Tap Options > Traffic > Settings.Select another stationOn the TMC STATUS WINDOW:• Tap (To the Left) and (To the Right) to tune to another station.Select Tuning Mode SettingsOn the TMC S ETTINGS WINDOW :1. In the Tuning Mode field, select an option:Automatically The system searches for another station if reception becomespoor.Hold station The system searches for the same station on a different fre-quency if the signal becomes poor.Hold frequency The system does not search for another station if receptionbecomes poor.2. Tap (List) to view the list and select an option.3. Tap the Done button to save your changes.Recalculating RouteOn the TMC STATUS WINDOW :1. In the Recalculate Route field, select an option:On Request The route is only recalculated when requested.Automatically The route is automatically recalculated every time a severetraffic event is identified on the route.Note: Some stations do not have TMC information.
