58 –5902 Prior to commissioning2.1 Package contentsPlease check that the contents of the package arecomplete. If this is not the case, please inform uswithin 14 days of purchase. The package you havepurchased contains:– The P´ 9611 navigation device– Battery– Car holder– Car charging cable power supply cable for12 V cigar lighter socket– Mains charger cable– USB cable– [ Pre-installed ] SD Memory Card– Manual– Guarantee card– DVD [ files for restoring the SD card andmanuals in pdf format ]– Battery compartment cover2.2 Initializing the deviceThe following steps are to be carried out before use:– Insert battery– Charge battery– Insert Memory Card– Install the holder in the car– Switch the device on2.2.1 Insert battery1. Remove the battery from the packaging.2. Remove the battery compartment cover.3. Insert the battery into the battery compartment.4. Close the battery compartment.2.2.2 Charging the battery! Note: the battery is not supplied in a chargedstate and must be fully charged before it is usedfor the first time. When charging the battery forthe first time, it should remain connected to thepower supply for at least 12 hours.The battery cannot be charged when the deviceis switched off, or, when the device isconnected to a computer, via the USB cableprovided. [6]1. Slide the adapter connector on the back sideinto the guide of the mains adapter.2. Insert the mini USB connector of the mainscable into the power supply socket on the LEFTSIDE of the device.3. Insert the plug of the mains cable into a mainssocket.Front view[ 1 ] Hardware keysKey INCREASE VOLUMEKey DECREASE VOLUMEKey ON / OFF[ 2 ] Touchscreen[ 3 ] Display external power supply and Bluetoothdisplay:– The power supply display lights up ORANGEwhen the device is connected to an externalpower source.– The Bluetooth display lights up BLUE whenthe P´9611 has established a Bluetoothconnection to a mobile telephone.Rear view[ 1 ] Battery compartment cover[ 2 ] Connection for an external GPS antenna[ optional ][ 3 ] Headphone connection[ 4 ] Reset button[ 5 ] SD slot[ 6 ] Power supply connection / USB cableconnection[ 1 ][ 2 ][ 3 ][ 1 ][ 2 ][ 3 ][ 4 ][ 5 ][ 6 ]