23Lamp Replacement for Recessed ModelReplacing LampsLamp replacement in the Recessed Hi-Lite light is verysimple. Just follow these easy instructions.Remove Lamp1. Turn off power and allow lamps to cool before han-dling.2. Hold the top/front edge of the diffuser assembly inplace. Loosen both captive screws.3. Gently lower the top portion of the diffuser assemblyuntil it clears the bottom of the main enclosure.4. Pull the diffuser assembly out and away from theenclosure.5. Lift up on end of lamp being replaced until you hear aclick.6. Grip socket-end of lamp and pull it out and away fromsocket.

Introduction to the Hi-Lite

Features & Benefits

Model Comparison Chart

Safety Precautions

Electrical Wiring Diagrams

Installation Kit Check List

Installation Instructions

Operation

Lamp Replacement

Chassis Removal

Specifications

Photometric Measurements

Glossary of Terms

Warranty

Navitar EX Instruction Manual

Hi-Lite EX

Hi-Lite EXR

Hi-Lite NX

Hi-Lite NXR

Hi-Lite XL

Hi-Lite XLR