Navman 7000 Operation Manual
Also see for VHF 7000: Service manualOwner's manualTheory of operationInstallation guide
                                                    | |
Contents
| 
18 VHF 7000, 7100US, 7100EU Operation ManualNAVMANSection 3 - Radio Setup Menu (RADIO SETUP)3-1 Radio Setup Menu (RADIO SETUP)Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save andchange data.3-2 Channel Names (CH NAME)The channel charts are listed in Appendix C with their default name tags. CH NAME gives youthe option to edit or delete the channel name tags displayed on the screen.1. Select RADIO SETUP, then CH NAME.2. Use + or - to step through the channels with their name tags until you see the channel nametag you want to change, then press ENT. In this example, the channel name TELEPHONEassociated with channel 01 is being changed to PHONE1.3. Select EDIT and press ENT to edit the existing name tag. Input the new name over theexisting name. It can be a maximum of 12 characters.To delete the channel name, select DELETE and press ENT.CH NAMERING VOLUMEBEEP VOLUMEINT SPEAKERWATCH MODEWX ALERTCOM PORTEdit or delete channel names.See Section 3-2.(Selects if the WX Alert scanning mode is ON (on) or OFF (off).(VHF 7100US only.) See section 3-6.Selects the operation of Dual or Tri watch scanning.See section 3-5.Switch ON/OFF (on/off) the radio’s internal speakers. Seesection 3-4.Select NMEA protocol for communications between the VHFradio and any other instruments. See section 3-7.Set the volume level of the beeps.See section 3-3.Set the volume level of the incoming call notification beeps. Seesection 3-3.RADIO SETUP>CH NAMERING VOLUMEBEEP VOLUMECH NAMETELEPHONE 01 TELEPHONE>EDITDELETEEDIT CH NAMETELEPHONE EDIT CH NAMEPHONE1>YESNO |
Related manuals for Navman VHF 7000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine