Navman EZY 30 Series Hardware User Manual

Contents

Navman EZY 30 Series Hardware User Manual Manual pdf 3 page image

Home charger-specific safety informationTo charge your Navman from the mains power, use the home charger (Model: MII050100; Input: 100-240V AC 50-60Hz;Output: 5V DC 1A Max) supplied by Navman as an accessory (may be sold separately). Using other home chargers with yourNavman could result in serious injury or property damage.Never use the charger if the plug or cord is damaged.Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water maycause electrical sparks or fires.Never touch the charger when your hands or feet are wet.Allow adequate ventilation around the charger when using it to operate your Navman or charge the internal battery. Do notcover the charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carryingcase or other container.Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltagerequirements can be found on the home charger casing and/or packaging.Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed toexcess moisture.Internal battery-specific safety informationYour Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled,releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery.Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery infire or water.Only use the correct home charger (may be sold separately), usb cable or in-car charger supplied by Navman to charge yourNavman internal battery.Only use your Navman internal battery with your Navman unit.The Navman battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 45ºC (113ºF).Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navmandisclaims all liability for installation or use of your Navman that causes or contributes to death, injury or propertydamage or that violates any law.ComplianceWARNING This product, its packaging and its components contain chemicals known to the State of California to causecancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s Proposition 65.For regulatory identification purposes: EZY 30 Series is assigned a model name of N276. EZY 40 Series is assigned a model name of N271.Marking labels located on the exterior of your Navman indicate the regulations that your model complies with. Pleasecheck the marking labels on your Navman and refer to the corresponding statements in this chapter. Some noticesapply to specific models only.The user needs to switch off the Navman when exposed to areas with potentially explosive atmospheres such as petrolstations, chemical storage depots and blasting operations.3