Navman TRACKER 5100I Installation And Operation Manual

Navman TRACKER 5100I Installation And Operation Manual Manual pdf 25 page image

25TRACKER 5100/5100i/5500/5500i Installation and Operation ManualNAVMAN12 About displayTo go to the about display, press DISP and selectAbout.The about display shows:The software version and date.The world chart version.Any card fitted.The number of waypoints, routes and tracksin the TRACKER.Wiring information for the TRACKERconnectors.In the unlikely event of having to contact a NAVMANdealer for service, quote the software versionnumber and date.Sorting the file namesThis sorts the displayed file names.1 Press MENU and select Sort.2 Select sort by Name, Type or Time.The TRACKER has a number of advanced navigationfeatures which are set up through the setup menu.We recommend that you become familiar with theoperation of the unit using the default settings before13 Setup menuLanguageSelect the language for the displays. The optionsare English, Italian, French, German, Spanish, Dutch,Swedish, Portuguese and Finnish.Colours (TRACKER 5500, 5500i)Select the colour scheme for the LCD display. Theoptions are:NormalSunlight: Brighter colours, more visible insunlight.Night: Reversed colours for night, to preservenight vision.Paper: Simulates the colours of a paper chart.13-1 System setupKeybeepEnable or disable the beep when a key is pressed.Factory resetResets all the TRACKER setup menu data back tothe factory default settings as shown on the setupmenu map. Any waypoints, routes or tracks are notdeleted.After the reset, the TRACKER displays an installationmenu of setup data:1 Select the language to use.2 Change the setup data if necessary:i Select the data item to change.ii Use the cursor keys to change the data.iii Press ENT.3 When the setup data is correct, press ESC.making any changes to the data in these menus.To display the setup menu, press MENU until thesetup menu is displayed.