Navman Tracker 5430 Installation And Operation Manual

Navman Tracker 5430 Installation And Operation Manual Manual pdf 24 page image

24 TRACKER 5430/5430i Installation and Operation ManualNAVMAN4 To insert a waypoint in the route:i Select where the waypoint will be:To insert the first waypoint in a newroute, select Leg 1.To insert a waypoint at the end of theroute, select the unused leg at theend of the list of waypoints.Otherwise, select the waypoint toinsert the new waypoint in front of.ii Press ENT. A list of waypoints is displayed.Select the waypoint to use.As waypoints are inserted, the distance andbearing of each leg is shown automatically. Ifthe route has more waypoints than will fit onthe display, press or to see them.5 To remove a waypoint from the route:i Select the waypoint to remove.ii Press MENU and select Remove.6 Repeat this process until the route is finished.7 Press ESC.8 Display the route on the chart (see section10-2-3) and check that the route does notcross land or dangerous water.10-2-2 Editing a routeEditing a route from the chart1 In the routes display, select the route to edit.Press MENU and select Edit on chart.2 The selected route is displayed on the chart,with a circle around the first waypoint.3 Edit the route as described in section 10-2-1A, starting at step 4.Editing a route from the routes display1 In the routes display, press or tohighlight the route to edit. Press MENU andselect Edit.2 The selected route is displayed: the routename and a list of the waypoints.3 Edit the route as described in section 10-2-1B, starting at step 3.10-2-3 Displaying a route on the chartThis goes to the chart display, and shows theselected route at the centre of the display.1 In the routes display, press or tohighlight the route to display. Press MENUand select Display.2 It returns to the chart display, with theselected route displayed.10-2-4 Deleting a route1 In the routes display, press or tohighlight the route to delete. Press MENUand select Delete.2 Select Yes to confirm.10-2-5 Deleting all routes1 In the routes display, press MENU and selectDelete all.2 Select Yes to confirm.10-3-1 Starting a routeTo start the boat navigating along a route:1 In the routes display, press or tohighlight the route to use. Press MENU andselect Start.2 The TRACKER asks for the direction totraverse the route.Select Forward (the order the route wascreated) or Reverse.3 It displays a chart with the route marked andstarts navigating from the start of the route.10-3 Navigating a route10-3-2 Skipping a waypoint in a routeTo skip a waypoint when the boat is navigatingalong a route:In the chart display, press MENU and selectSkip.The TRACKER starts navigating straight towardsthe next waypoint on the route.Warning: Skipping a waypoint with theautopilot on might result in a sudden coursechange.10-3-3 Cancelling a routeTo stop the boat navigating along a route:In the chart display, press MENU and selectCancel route.