Nds surgical imaging Dome GX2MP Plus User Manual
                                      | |
Contents
| 
6 | Dome GX2MP PlusInstalling the DisplayBefore you install the display controller, remove any existing graphicscard and its driver from your system. Also disable any onboardgraphics capability on the motherboard.NOTE: The Dome GX2MP Plus display is supported only in digitalmode. Use of DICOM calibration with the Dome CXtra software canonly be supported on the DVI-D interface. Do not use analog mode;that is, the D-sub interface.Some NVIDIA boards require a DisplayPort-to-DVI adapter for eachconnector port.WarningIn locations where 240V outlets are used, connect the display toa center-tapped, 240V, single-phase supply only (for Canadaand the United States).If you leave the computer turned on, you could suffer electric shockor cause damage to system components.Remove the display controller slowly from its package and static-shielding bag to prevent an electrostatic discharge.Static electricity can damage the controller. When touching theboard or parts of the motherboard, take these precautions:• Wear an antistatic wrist strap.• Discharge your body’s static electricity repeatedly by touching thepower supply or the metal surface of the computer chassis. |
Related manuals for Nds surgical imaging Dome GX2MP Plus
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine