Necta Colibri Instructions For Installation, Use And Maintenance Manual

Also see for Colibri: Service manual Installation, use and maintenance handbook Installation - use - maintenance

Necta Colibri Instructions For Installation, Use And Maintenance Manual Manual pdf 25 page image

21© by NECTA VENDING SOLUTIONS SpA 03-2003 217 00MACHINE CONFIGURATIONWhen the “Machine Config.” function is displayed, themachine configuration can be changed, and namely:- cup dispensing / without cup- with tank in the cabinet / from the mains- presence of warning device for full liquid waste con-tainer (inside cabinet)Press the confirm button “ ” to display the current status;when pressing the correction button “ ” the status startsblinking and can be changed with the “ ” and “ ” buttons.IMPORTANT NOTICE!!!When the machine is initialised, the configuration willbe assigned the default values “with cup /with tank /with full waste container warning device”.THEREFORE, AFTER INITIALISING THE MACHINEMUST BE RECONFIGURED.OPERATION COUNTERThis function is used to lock the machine after a presetnumber of coffee selections, and a preset number ofinstant selections.Since this is a control tool used only by the vendingoperator, a 4-digit password must be entered.After entering the password, it is possible to set the numberof selections after which the machine locks, read thenumber of selections already made and reset the lockcounter.N.B.: The counters are set to zero by default;With the counters set to zero, this function is disabled.SETTING THE PROMOTIONAL MESSAGEWhen this menu is displayed, press the confirm button “ ”to display whether or not the message is enabled (ON/OFF).If the message is enabled, when pressing the confirmbutton “ ” the first character will start blinking and can bechanged.The buttons will take on the following functions:1 - Next character2 - Previous character3 - Upper case/lower case4 - ABCDEFGHI5 - JKLMNOPQR6 - STUVWXYZ7 - 0123456789:;<=>?8 - !"$%&'( )*+,-./The message is stored by pressing button “2” when on thelast position.LANGUAGE SELECTIONThis function is used to select the language to be used fordisplaying the messages.The available languages are:- English- Italian- French- Spanish- Portoguese- German