Nederman FilterMax DX Series Instruction Manual

Nederman FilterMax DX Series Instruction Manual Manual pdf 32 page image

32NCF FANSSee fan diagram page 16. For moreinformation contact your nearestNederman representative.INLET / OUTLETWith cleaning accesspanel on the top.Part no. Connection diameter12372664 Ø 250 mm12372665 Ø 315 mm12372666 Ø 400 mm12372667 Ø 500 mmFILTER REGULATORIs used for setting the correct air pressure.Separates dust in the pressured air whyit also protects the valves. Should beinstalled in the compressed air pipe line.Must be positioned in a frost freeenvironmentPart no. 12372064FAN STARTER PTCConsists of a contactor and an Y/D-start.To be connected together with the aftercleaning damper in a way that stops thefan when the damper has been closed.For more information contact yournearest Nederman representative.AFTER CLEANING DAMPER(Not a Nederman product) The damper closesthe duct when FilterMax DX is shut off, which willprevent dust from being transported back into theworkshop by the air pulses from the down timecleaning. The damper should be mounted closeto the FilterMax DX inlet.PRESSURE SWITCH(Not a Nederman product). Is used to indicatelow airflow or high fall of pressure over the filter.NB! If the switch should be mounted in anEX-zone, it must be EX-proofed and markedEx II 3 D or Ex II 2 D.01DUST FEEDERPlaned accessory. For auto-matic transport of collected dust.For normal or high dust loads.DUST COLLECTORPlaned accessory. 50 liter,with plastic bag, for low dustloads of dangeroussubstances.PRESSURE SWITCHMust not be mounted in an EX-zone.Part no. 372142DUST COLLECTOR50 litre.Part no. 12372663ADAPTOR FOR DELOADING DUCTFor connecting a round deloading duct to FilterMax DXrelief panel. Is delivered with a drawing formanufacturing a deloading duct.Part no. 12372765ACCESSORIES