Nederman FlexPAK 800 Installation And Service Manual

Also see for FlexPAK 1000: Setting manual User manual

Contents

Nederman FlexPAK 800 Installation And Service Manual Manual pdf 17 page image

FlexPAK 800/100017ENNOTE! Standards relating to the connection and use of filters in hazardous areas are tobe taken into consideration, especially national standards for installation. Only trainedpersonnel familiar with these standards is allowed to handle this type of filter.NOTE! The designer of the system as a whole, has to guarantee the correct function ofall interacting products or components and ensure that the complete system meets allnecessary safety requirements.NOTE! Make a layout for the entire system before installing the unit.NOTE! Fill in the installation protocol during installation, see ‘Appendix A: Installationprotocol’.5.1 Delivery checkCheck the unit for any transport damage. In case of damage or missing parts, notify thecarrier and your local Nederman representative immediately.5.2 Installation requirementsPrepare the location where FlexPAK 800/1000 is to be placed before installation. Considerthe following when installing the unit:• The unit is to be anchored to a hard, level and firm foundation. There are fourfastening brackets on the bottom frame to be used to fasten the unit to the raisedfoundation.• The total weight of the unit with accessories.• Maximum weight of the collected material.• Do not install the unit close to heat sources or hot surfaces.• Beware of hot air from the outlet.• Ensure that handling is convenient.• Ensure that emptying collected dust is convenient.• Ensure that service and maintenance are convenient.• In case of high relative humidity, do not expose the unit to freezing temperatures.• Do not place the unit in direct sunlight.5.3 Duct dimensions and installationFigure 9 shows the unit installation in a typical vacuum duct system.5.3.1 RequirementsPlace a sign with the intended use of the vacuum system on every user interface(workstation). Inform all personnel of the intended use of the system. Ensure thatpersonnel using the equipment do not collect items that may cause ignition or blocking.