Page 2 of 12ForewordThis document describes how to install and operate the Neets Control - LiMa.COPYRIGHT - All information contained in this manual is the intellectual property and copyrightedmaterial of Neets. All rights are reserved. You may not allow any third party access to content,information or data in this manual without Neets’ express written consent.CHANGES - Neets reserve the right to change the specification and functions of this productwithout prior notice.Questions, AFTER reading this manual, can be addressed to your local distributor or:Neets A/SLangballe 48700 HorsensDenmarkby E-Mail: Support@Neets.dkor you may use our contact form at www.neets.dkRevision listThis document has the following revision changes:Author: Date Description Pages RevTBB: 09-08-2018 First release. All 1.00What is in the box?When you open the box it will contain the following items:• 1 x Neets Control - LiMa• 5 x Terminal connectors• 2 x Screws and plugs for wall mounting O4 x 60 mm• 2 x Screws for mounting on Neets Rack Shelf M4 x 35 mm• Manual! Note that PoE power injector is not included. Use the PoE Injector(Part number: 302-000508).