Neets Control TanGo Installation Manual
               | |
Page 6 of 15SpecificationsNeets Control - TanGoRS-232 / IR portPorts 3 x bidirectional2 x unidirectionalBaud rate 1200 - 115200 bit/secData bits 7, 8Parity Even, Odd, NoneStop bits 1, 2IR frequency 400 Hz to 500 HzConnector 3 pin screw blockIR learnIR learn frequency 1 KHz to 150 KHzInput / OutputPorts 8 x I/0Input trigger low < 1VDCInput trigger high < 4VDCOutput type Open drainIsolated output NoMax voltage load 24 VDCMax current 0,5 AConnector 4 pin screw blockRelay OutputVoltage max 30 VDCCurrent max 0,5 AConnector 2 pin screw blockNetwork (LAN)Speed 10 / 100 MbitDuplex modes Half or FullDHCP Default offDefault IP 192.168.254.252Default gateway 192.168.1.1Default subnet mask 255.255.255.0PoE inputCompliance 802.3af / 802.3at802.3af PD mode A + BPD Class 0 (802.3af) / 4 (802.3at)PoE outputCompliance 802.3atMax power output 12 W @ 15 W inputPSE output mode Mode B(pin 4/5 + 7/8)PoE Injector (included)Input voltage 100 VAC - 240 VACLine frequency 50 Hz - 60 HzMax power usage Max 27 WConnector Cable with connector-matching country ofsaleGeneralWidth 220 mmHeight 35 mmDepth 70 mmWidth 8,66 inchesHeight 1,38 inchesDepth 1,46 inchesWeight 0,5 kgShipping weight 1,0 kgShipping dimension 280 mm / 190mm /(W/D/H) 55 mmStorage temperature -20 ˚C to 50 ˚CStorage moisture Non-condensingOperation temperature 0 ˚C to 30 ˚COperation moisture Non-condensingProduct number310-0305 TanGoApprovalsIEC/EN 61000-6-1IEC/EN 61000-6-2FCC Part 15, Class ACE |
Related manuals for Neets Control TanGo
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine