Neitz Spot Illuminator NSI-III Instruction Manual
                                    | |
Contents
| 
114-1 PreparationTo prepare, start with NEITZ Binocular Loupe with Frame, dry lint-free cloth, lint-free soft clothslightly moistened with diluted neutral detergent, and cotton swabs for cleaning.4-2 Inspection of IlluminatorClean the surface of Illuminator in accordance with the Section "6.1 Cleaning" before inspection. Ifnecessary, disinfect it as well.Confirm that there is no damage on the Illuminator including Lens, Cord, Light plug, Middle switch,including other parts as well as the Battery pack. If any items are damaged, do not use theIlluminator and immediately contact to your local dealer.4-3 Inspection of BatteryConfirm that the battery does not leak organic electrolyte which is contained in the battery. Ifelectrolyte leakage occurs, do not make contact with leakage and clean up with absorbent cloth andmove the battery away from any fire. Actions described below are required if contacted.Eye contact: Flush the eyes with plenty of clean water for at least 15 minutes immediately,without rubbing. Obtain medical treatment. If appropriate procedures are nottaken, eye irritation may develop.Skin contact: Wash the contact areas off immediately with plenty of water and soap. Ifappropriate procedures are not taken, injury and sever irritation to skin maydevelop.Inhalation: Move to fresh air immediately. Obtain medical treatment.4-4 Inspection of Battery ChargerConfirm that the body of the charger is not damaged and that batteries can be inserted firmly inplace without becoming loose. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine