Nektar Impact LX25+ Installation And Setup

Contents

Nektar Impact LX25+ Installation And Setup Manual pdf 4 page image

4 Using Nektar Impact LX+ with Reaper www.nektartech.comReaper Mixer ControlTo control the Reaper mixer, press the [Mixer] button to select the mixer preset. The button’s LED is illuminated while thepreset is selected and the Reaper mixer is being controlled.Open/Close the Reaper Mixer WindowIf the Reaper mixer is not in view pressing [Shift]+[Mixer] will bring it in to view. Press the same button again to close themixer window. While the Mixer preset is selected, your Impact LX40+ continues to control the Reaper mixer, even if themixer window is closed.Channel Volume & PanWith the mixer preset active, moving faders 1-8 will control the first 8 mixer channels in the Reaper mixer. The 8 pots controlpan for each or the corresponding channels.LX25+: On the Impact LX25+, the 8 pots control 8 mixer channels by default. You can switch them to control Pan by pressingand holding [Mixer] while moving the pots.Fader 9 (on LX25+, the single fader) controls the channel corresponding to the currently selected track. As you changetracks, you can therefore quickly change volume for the track you are working with. If you have 16 tracks in your song andthe currently selected track is 12, that would result in faders 1-8 controlling mixer channel volume 9-16 and fader 9controlling channel volume 12.Mute & SoloFader buttons 1-8 control mute for each of the tracks the faders are assigned to control. If you prefer to solo tracks, you canpress and hold fader button 9 while pressing fader buttons 1-8. The 8 buttons will now control solo for their correspondingtracks.LX25+: On Impact LX25+, you can use the pads to control mute for tracks 1-8. Press and hold [Mixer] while hitting pads 1-8.This will toggle mute on or off for the corresponding channels. Release the [Mixer] button and the pads revert to trigger MIDInotes. It is not possible to control the Solo function with LX25+.Bank Over (1-8), (9-16) etcIf your song contains more than 8 mixer channels you can bank over so the faders 1-8 control the next group of 8 channels.To do this, press [Shift]+[Bank>] (the second fader button). The faders, pots and fader buttons are now assigned to controlchannels 9-16. Push the same key combination again to control 17-24 etc.To go back you press [Shift]+[LX25+: On Impact LX25+ press and hold [Mixer] while pressing [Octave-] or [Octave+] to move the bank down or up.Master VolumeYou can control the Master Volume fader of the Reaper mixer by pressing [Fader button 9] and then move fader 9 while thebutton is pressed.Upon release of the button, fader 9 will revert to control the current channel volume.LX25+: On Impact LX25+, press [Mixer] and move the [Fader] to control master volume.

/ 6

Related manuals for Nektar Impact LX25+