1WARNINGLubricantsDo NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants willcause swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommendedthat Dow Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Com-pound is used in the manufacture of the control valves. (Part # DOW-7)SealantsPipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommendedthat Teflon® tape be used to seal plastic Noryl® threaded fittings.NORYL is a registered trademark of SABIC Innovative Plastics IP B.V.AIO Plus Connected Series General Warnings