Nelson N1500i Fast Start Manual

Also see for N1500i: Operating manual Operation and service manual

Contents

Nelson N1500i Fast Start Manual Manual pdf 6 page image

Stud welding unit N1500iVersion 1.31 7.June.2013Manual part number: 729-110-0271Nelson Stud Welding, Inc. • 7900 West Ridge Road • Elyria, Ohio 44035 • USA1 Connection and Installation1.1 Installation PrecautionsAttention must be paid to the fact that the welding unit is installed onhorizontal, vibration-free and non-slip floor space The load-carryingcapacity of the floor space should be at least double the weight of thewelding unit.When working in high-lying locations, such as bridges, ladders or plat-forms the N1500i must be secured against the risk of falling.The Nelweld N1500i must be adequately protected against the intrusi-on of liquids. It may not be installed on liquid-bearing pipelines.In order to guarantee unimpeded temperature exchange with the envi-ronment, a minimum clearance of 1 m (39.4 inch) to existing heat sour-ces must be observed.Attention must be paid to the fact that the ventilation slits on the unitcasing are kept free.1.2 ConnectionWith the exception of the input power cable all the connecting elementsare arranged in a functional manner on the front plate of the N1500i.