Nematron iPC Series User Manual
Contents |
________________________________________________________________________________________Document No. DOC-IPC-003,User Manual iPC-Series & nPC300, Rev C Rel. 11-2014 Page 4 of 27SpecificationsFront PanelsThe iPC series has NEMA 4/4X/12 (IP66) sealed front panels when mounted in an appropriate NEMArated enclosure. The front panels and required cutouts are exactly the same as the appropriate size ePC-Series or M-Series units for easy migration to the iPC-Series from the other units. See Chapter 2 for moredetails on installation and selection of an appropriate enclosure. All four sizes have very similar front panelswith different dimensions.Figure 1.0: iPC Series Front Panel ComparisonThe standard front panels are powder coated aluminum. The optional Stainless Steel front panel is type 304and will not contain a logo pocket or logo on the front. The window area is clear polycarbonate when orderedwithout a touchscreen (N/A on ATEX Zone 2/22 configurations). The touchscreen option is heat annealedglass covered by a polyester overlay. The polyester overlay has better resistance to chemicals than thepolycarbonate window. Depending on the chemicals involved in your application consideration should begiven to choosing the proper window material. In addition there is a Rack Mount front panel option for theiPC1900 (19” unit) only. This front panel is powder coated aluminum and is 9U high with four rack mountspaced counter-bored mounting holes on each side of the panel. This panel is not NEMA sealed wheninstalled. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine