Nemaxx FCA35X Original Operating Instructions
                                                                                            | |
Contents
| 
13KEN001VKMv03 • 07.09.2017Adjusting markMotor operating directionAdjusting ventENLIMITED ADJUSTMENT OF MOTORThe most ideal state of the tubular motor is pre set at the factory and should not requireany major adjustment in the process of using.In case of the following conditions, the motor needs limited adjustment.• The awning canot close completely.• The cover is loose.• The motor is still working, while the awning is completely closed.Useful tipsIf you want to change the distance of projection, please use the motor adjustor to adjustthe motor, “-” for increasing distance, “+” for decreasing the distance.ToolMotor adjustorNotes1. If the motor does not work after several times of adjustment, please wait 30 minutes torestart.2. The motor must not be over heated and over frequently used, so as to prolong the it’slifespan.3. The motor should be kept away from water, during delivery, storage or working.Receiver built in the motorIt is not necessary to do any adjustment or programming on the receiver while installing theawning. |
manualsdatabase
Your AI-powered manual search engine