3Version: 9a13.11.2018EN1. FUEL REQUIREMENTPellets are made from wooden waste, from sawmills and planning workshops, as well as fromresidue from forestry operations.These “starting products” are crushed, dried, and pressed into Pellet “Fuel” without any bondingagent.SPECIFICATIONS FOR HIGH QUALITY PELLETSCalorific Value: 5.3 kWh/kgDensity: 700 kg/m3Water Content: Max. 8% of the weightAsh proportion: Max. 1% of the weight Diameter: 5 - 6.5mmLength: Max. 30mmContents: 100% wood untreated and without any bonding agents added(bark proportion max. 5%)Packaging: In sacks, made of environmentally neutral or biologically degradable plastic,or from paper (2-3 layers / similar to cement packaging)Please ask your pellet stove dealer for tested fuel and a list of monitored fuelmanufacturers.Using poor quality or prohibited pellet fuel will have a negative effect on the functionof your pellet stove and can also lead to the warranty becoming null and void, as wellas the product liability connected with this.Observe waste incineration legislation.Burn only pellets that have been tested.PELLET STORAGEIn order to guarantee problem free burning of the wooden pellets, it is necessary to store the fuel asdry as possible and free from impurities.This appliance is not intended for use by persons (including children) with reducedphysical, sensory or mental capabilities, or lack of experience and knowledge, unlessthey have been given supervision or instruction concerning use of the appliance by aperson responsible for their safety:Children should be supervised to ensure that they do not play with the appliance.