Network Configuration40 On-board LANNameDefault: On-board lanThis field enables you to enter a descriptive name for this LANconfiguration. The name will be used to identify the networkconfiguration to the user.Link typeDefault: autosenseThis specifies the speed (10 or 100 MB) and mode (Half or Fullduplex) of the network card. Selecting autosense will enable the thinclient to automatically detect the best speed and mode.AutostartDefault: CheckedThis determines whether this network connection is automaticallystarted when the thin client is powered-on or rebooted.The IP Settings Tab Enable DHCPDefault: CheckedThe setting of this option determines how the thin client obtains net-work configuration settings.When DHCP is enabled, the thin client will rely on a remote DHCPconfiguration service to supply the required settings. These settingsare then saved in the thin client. At the next client bootup, if theclient cannot reach the DHCP server, the client will connect to thenetwork using the saved network information provided that theinitial lease time has not expired.Unchecking this box will disable remote network configuration andcause the thin client to use the network settings specified in thefollowing dialog options. You will need to ask your networkadministrator for the entries required.
