Neoware c50 - Thin Client User Manual
Also see for Neoware c50 - Thin Client: User manualUser manualUser guideUser guideUser manual
                                                                          | |
Contents
| 
Safety Instructions vSafety InstructionsPlease read these safety instruction carefully and keep this user’s manual for later refer-ence.1. Before removing the outer case from the thin client, always disconnect the AC power cordto prevent the possibility of dangerous electrical shock.2. Before cleaning, disconnect the thin client from AC power. Do not use liquid or sprayedcleaning products to clean the unit. Instead, use a moistened sheet or cloth for cleaning.3. Do not expose the thin client to excessive humidity.4. Be sure to install the thin client on a secure surface. A falling device could cause injury.5. Place the power cord in such a way to avoid people stepping on it. Do not place anythingover the power cord.6. Be sure to note all cautions and warnings on the thin client.7. If the thin client is not used for a long period of time, disconnect the AC power to avoiddamage caused by voltage transients.8. Never pour any liquid into any thin client openings: This could cause fire or electricalshock.9. If one of the following situation occurs, be sure to get the thin client checked by a qualifiedservice technician:a. The power cord or plug is damaged.b. Liquid penetrates the thin client case.c. The thin client is exposed to moisture.d. The thin client does not work well or you cannot get it to work according to the user’smanual.e. The thin client has been dropped or damaged.f. If the thin client has obvious signs of breakage.10. The thin client should be stored and used only in temperature and humidity controlledenvironments. Storing thin clients below -20°C (-4°F) or above 60°C (140°F) may causedamage.11. The sound pressure level at the operators position according to IEC 704-1:1982 is equal orless to 70dB(A).12. The input power cord shall be minimum H05VV-F, 3G, 0.75mm², rate minimum 6A.13. The thin client should be used only where ambient air temperatures are maintained below40°C. |
Related manuals for Neoware Neoware c50 - Thin Client
manualsdatabase
Your AI-powered manual search engine