ezConnect - The NeoLinux Connection ManagerAppliance properties 494 The Stereo Balance slider adjust the left/right mix of your line outsound.Note: This will not affect the sound output of an thin client’sinternal speaker (if applicable).5 The two Bell Settings adjust the pitch and duration of the systembell. Click the Test Sound button to preview your settings.6 Click OK to accept the changes.Servers Note: The Servers menu selection may not be available on your thinclient, depending upon the software version installed.1 If ezConnect isn’t on screen, simultaneously press CTRL + ALT +END.2 Select Settings | Appliance properties | Servers.The Server Set-tings dialog willappear on yourscreen. The Net-work Drives tabis used to mapone or more net-work drive(s)for NeoLinuxapplications touse. The X Win-dow tab allowsyou to specifyXDM and XFont servers thatdo not respondto XDMCPbroadcasts (so that they are available when creating an X Windowconnection). The usual reason for no response being obtained toXDMCP broadcasts is that there is a router between the thin clientand the XDMCP machine(s).
