manuals
database
Your AI-powered manual search engine
Search
Home
Brands
Neoway
Control Unit
N20
Neoway N20 At Command Manual
Print this manual
Download
Neoway N20 At Command Manual
Also see for N20:
User guide
Hardware user's guide
Table of content
Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Boot LOG Instruction
General Commands
Querying Signal Quality: +CSQ
Querying the Network Registration Status: +CREG
Querying EPS Network Registration Status: +CEREG
Querying the IMSI: +CIMI
Querying IMEI: +CGSN
Querying the Module Model: +CGMM
Setting the Baud Rate of the Module: +IPR
Activating Multiplexing Mode: +CMUX
Clock: +CCLK
Enabling PIN and Querying MT and Network Device: +CLCK
Modifying the Password of the PIN: +CPWD
Defining PDP Context: +CGDCONT
PDP Authentication: +XGAUTH
Enabling & Disabling the Terminal Display: ATE1/ATE0
GPRS Dialing Command: ATD*99
SMS Commands
Setting Preferred SMS Storage: +CPMS
Setting SMS Inputting Mode: +CMGF
Setting the TE Character Set: +CSCS
Setting the SMS Indication Mode: +CNMI
Reading SMS Messages: +CMGR
SMS Message List: +CMGL
Sending SMS Messages: +CMGS
Writing SMS Messages: +CMGW
Sending Messages from Storage: +CMSS
Deleting SMS Messages: +CMGD
Setting the SMS Center Number: +CSCA
Displaying the Parameters of the Text Mode: +CSDH
Save Settings: +CSAS
TCP/UDP Client Commands
Setting Receive Mode: +RECVMODE
Setting Up TCP Link: +TCPSETUP
Sending TCP Data: +TCPSEND
Receiving TCP Data: +TCPRECV
Closing TCP Link: +TCPCLOSE
Sending UDP Data: +UDPSEND
Receiving UDP Data: +UDPRECV
Reading UDP Data: +UDPREAD
Querying TCP/UDP Link Status: +IPSTATUS
TCP Server AT Commands
Closing the Listening Connection: +CLOSELISTEN
Receiving Data from the Client: +TCPRECV(S)
Querying the Connection Status on the Client: +CLIENTSTATUS
Querying the Status of Data Sent by the TCP Link: +TCPACK
Transparent TCP/UDP Commands
Setting Up Transparent UDP Link: +UDPTRANS
TCP Transparent Server Commands
Querying the Link Status on the Client: +CLIENTSTATUS
FTP AT Commands
Logging Out from the FTP Server: +FTPLOGOUT
Uploading Data to the FTP Server: +FTPPUT
Querying FTP Link Status: +FTPSTATUS
HTTP Commands
Setting Up HTTP Link:+HTTPSETUP
Closing HTTP Link: +HTTPCLOSE
HTTP Link Closing: +HTTPCLOSED
HTTPS Commands
HTTPS Request: +HTTPSACTION
Closing HTTPS Link: +HTTPSCLOSE
HTTPS Link Closed Report: +HTTPSCLOSED
GPS AT Commands
Obtaining NMEA Data: $MYGPSPOS
Setting APN of AGPS: +AGPSOPEN
Setting AGPS Server: +AGPSSETSERVER
PSM&eDRX Commands
Setting eDRX Mode: +CEDRXS
MQTT Command
Connection Command: +MQTTCONN
Unsubscription: +MQTTUNSUB
Publishing Topic: +MQTTPUBS
Querying the MQTT Connection Status: +MQTTSTATE
Ali MQTT Command
Configuring MQTT Connection Parameters: +CLOUDCONN
PUBLISH Data: +CLOUDPUBLISH+PUBLISHDEFAULT
Publishing Messages: +CLOUDSUB
Unsubscribing: +CLOUDUNSUB
Disconnecting to the MQTT Server: +CLOUDDISCONN
AWS MQTT Commands
Setting User Parameters: +AWSAUTHPARAM
Connection Command: +AWSCONN
Receiving Topic Content: +AWSSUBRECV
Unsubscribing to Topic: +AWSUNSUB
Querying MQTT Status: +AWSSTATE
Other AT Commands
Obtaining the Version Information of the Module: $MYGMR
Obtaining the CCID of the SIM Card: $MYCCID
Setting Network Mode: +NETCFG
Querying Network State: +NETSTATE
N
20
AT Command Manual
Copyright © Neoway Technology Co., Ltd
75
9
HTTPS Commands
9.1
Setting HTTPS Parameters: +HTTPSPARA
Description
To set HTTPS parameters
Format
AT
+HTTPSPARA=
,
Parameter
: HTT
PS parameters, including two parameters
url: destination path
port: destination port number
: the value of the
, 128 bytes at most for url; 443 by default for
port
Return Value
See the Example
Example
AT
+
HTTPSPARA
=url,www.alipay.com/ind
ex.htm
l
OK
Set
URL
to
the
alipay
homepage.
The
URL
supports
DNS
translation.
AT
+
HTTPSPARA
=url,support.cdmatech.com/index.ht
ml
OK
Set URL.
AT+HTTP
S
PARA=url,
ERROR
The AT command is in
wrong format.
AT+HTTPSPARA=port,443
OK
Set the destination port
to
443.
Remarks
To send new HTTPS request, set new HTTPS parameters.
The
HTTPS
connection
is
closed
if
the
+HTTPSCLOSE
command
is
executed.
9.2
Setting Up HTTPS Link: +HTTPSSETUP
Description
To set up an HTTPS connection
Previous
Next
/ 130
Zoom view
Related manuals for Neoway N20
Neoway Neo WM620 At Command Manual
Neoway N11 V2 At Command Manual
Neoway WM620 Series At Command Manual
Neoway M590 At Command Set
Neoway S720 Manual
Neoway M590E Manual
Neoway N77 User Manual
Neoway N20 Hardware User's Manual
Neoway M660 User Manual
Neoway N75-NA User Manual
This manual is suitable for:
N20
manuals
database
Your AI-powered manual search engine
